Tag: U.FL

WCO-FLY 868 915 MHz waterproof compact omni antenna

Written by EAD Admin on 20th June 2023. Posted in 169 / 433 / 868 / 915 Antennas.

The WCO-FLY 868 915 MHz antenna is a permanent mount antenna with an integrated IPEX (U.FL) cable. Based on our WCO (waterproof compact omni) antenna platform, this model can be supplied at either 868 MHz or 915 MHz frequency bands (other frequencies may be possible). Mounting via a threaded stud with o-ring to provide a watertight seal, the antenna can mate to radios/modules that have a U.FL antenna connector.

The antenna is housed in an UV-resistant sheath which is robustly attached is a modified N-type connector based facilitating the threaded stud mount.

For availability and pricing for the WCO-FLY 868 915 MHz antenna, please contact us.

GNS3602 GPS GLONASS passive internal antenna

Written by EAD Admin on 29th September 2020. Posted in GPS & GNSS Antennas.

The GNS3602 GPS GLONASS passive internal antenna is fed by a microcoax cable and IPEX-terminated (U.FL compatible) cable. The GNS3602 is designed to be integrated into GPS / GLONASS enabled devices and terminals where the GNSS module can only accommodate passive GPS/GLONASS antennas (GNSSS antennas without a LNA Low Noise Amplifier).

The GNS3602 is nicely compact measuring just 20 x 20 x 6mm and offers 1.5 dB gain at centre frequency. Ideal for portable and mobile devices, this antenna can be easily designed into tracking and location-based applications.

The GPS3602 is the GPS only version of this antenna.

Other cable lengths and connector configurations are possible, please contact EAD for details.

Also check out our GPS-Stubby antennas for active GPS stubby antenna solution.

The L-Flex is a flexible 4G LTE PCB antenna

Written by EAD Admin on 8th September 2017. Posted in News.

We are pleased to introduce its new L-Flex antenna, a flexible 4G LTE PCB antenna. Designed to be integrated into 4G LTE multiband terminals, devices and wireless products, the L-Flex is an innovative antenna solution for many applications. It can be deployed in such products as security and alarm panels, kiosks, wireless CCTV platforms and industrial telematics and monitoring where a groundplane independent antenna is required.

We are pleased to advise you that L-Flex has variety of coaxial cable and connector options which lend themselves to connect to variety of 4G and LTE modem, terminal and router platforms. The most common connectors are U.FL, TS9 and SMA connectors, but we can also offer FME, CRC9, TNC, MMCX, MCX and many more. If we have not listed your desired connector, please contact us for assistance.

If you require more information, we are happy to help. You can visit the product page for the specification sheet or you can contact us for pricing.

GPS3602 – passive GPS internal ceramic patch antenna

Written by EAD Admin on 4th September 2017. Posted in GPS & GNSS Antennas.

The GPS3602 is a passive GPS internal ceramic patch antenna fed by a microcoax cable and IPEX-terminated (U.FL compatible) cable. The GPS3602 is designed to be integrated into GPS enabled devices and terminals where the GPS module can only accommodate passive GPS antennas (GPS antennas without a LNA Low Noise Amplifier).

The GPS3602 is nicely compact measuring just 20 x 20 x 6mm and offers 1.5 dB at centre frequency.

Other cable lengths and connector configurations are possible, please contact EAD for details.

For active GPS internal ceramic patch antennas, we have the GPS36xx range in which each antenna has a LNA with optional gain figures of 15, 20 and 26 dB.

BUF2400 – WiFi captive mount terminal antenna

Written by EAD Admin on 4th September 2017. Posted in 2.4 & 5.8 GHz Antennas.

The BUF2400 is a WiFi captive mount terminal antenna based on a 2.4 GHz ½ wave dipole design for fixed and portable WiFi and WLAN wireless devices.

Supporting the 2.4 GHz frequency, the BUF2400 is mounted using a captive, multi-position snap-in part and connected to the radio using a U.FL compatible connector.

The BUF2400 is an ideal solution for applications where an external bulkhead (panel mount) antenna connector is not required or undesirable and/or detaching the antenna from the terminal during use is to be avoided.

The BUF2400 provides a neat WLAN and Bluetooth antenna solution. For 4G captive mount antennas, you could consider the LTF7270 antenna.

LTF7270 – 4G LTE captive mount terminal antenna

Written by EAD Admin on 21st August 2017. Posted in 5G & LTE/4G Antennas.

The LTF7270 is a multiband multi-position, articulating, 4G LTE captive mount terminal antenna for modems, routers and devices that are running a radio module with U.FL connectors.

The LTF7270 offers a terminal mount antenna solution without the need to use a bulkhead (or panelmount) SMA connector on the enclosure. It has articulating base that locks in 3 positions, vertical, horizontal and at 45 degrees. The antennas mount by way of a threaded stud and are held in place by a locking nut. Through the middle of the stud a coaxial cable feeds the antennas via an IPEX (U.FL compatible) connector.

The LTF7270 is ideal for and for applications where users should be discouraged from removing the antenna from the terminal or device.