Tag: RP-SMA

WFS5 WiFi6 WiFi6E terminal mount antenna

Written by EAD Admin on 2nd October 2022. Posted in 2.4 & 5.8 GHz Antennas.

The WFS5 WiFi6 WiFi6E terminal mount antenna is a higher gain router/modem mount antenna for WiFi applications. Housed in a sleek sheath, the WFS5 antenna offers robust RF performance across the entire frequency range. With omni-directional gain across all bands, this antenna ensures consistent reception and transmission making it ideal for a variery of WiFi applications.

A higher performance model than our WFS3 antenna, the WFS5 offers 3 dBi gain on the lower bands and 4/5 dBi gain on the upper bands whilst only measuring 203.2mm in overall length. The antenna is groundplane independent and does not require mounting on a groundplane to radiate effectively.

The WFS5 WiFi6 WiFi6E is ideal for a range of wireless LAN applications where a terminal-mounted antenna is required.

For a more compact WiFi6 WiFi6E antenna model, check out our WFS3 antenna which offers consistent RF performance in a smaller form factor.

WFS3 WiFi6 WiFi6E terminal mount antenna

Written by EAD Admin on 27th September 2022. Posted in 2.4 & 5.8 GHz Antennas.

The WFS3 WiFi6 WiFi6E terminal mount antenna is a router/modem mount antenna for WiFi applications. Housed in a sleek sheath, the WFS3 antenna offers robust RF performance across the entire frequency range. With omni–directional gain across all bands, this antenna ensures consistent reception and transmission making it ideal for a variery of WiFi applications.

A compact model, the WFS3 offers 2 dBi gain on the lower bands and 4 dBi gain on the upper bands whilst only measuring 123.7mm in overall length. The antenna is groundplane independent and does not require mounting on a groundplane to radiate effectively.

The WFS3 WiFi6 WiFi6E is ideal for a range of wireless LAN applications where a terminal-mounted antenna is required.

For a higher gain model, check out our WFS5 antenna which offers higher gain on both lower and upper bands.

Hot Product – BTR2458 dual band wifi terminal antenna

Written by EAD Admin on 18th December 2017. Posted in News.

The BTR2458 dual band wifi terminal antenna is a 2.4 and 5 GHz compact dipole antenna designed for portable and fixed WiFi terminals and devices. Available with either a SMA-Male or RP-SMA connector and housed in a black, injection-moulded ABS sheath, the BTR2458 will connect to most WLAN terminals and devices offering robust performance in a discreet form factor.

The antenna is small enough for mobile or portable devices and has an articulating connector that can lock in either the horizontal or vertical positions for operational flexibility.

For more information on the BTR2458 antenna, you can download the specification sheet from the product page or contact EAD for any other questions.

BT-Stubby – quarter wave WLAN stubby antenna

Written by EAD Admin on 4th September 2017. Posted in 2.4 & 5.8 GHz Antennas.

The BT-Stubby is a cost-effective quarter wave WLAN stubby antenna operating in the 2.4 GHz WiFi frequency band and is used for wireless device applications including portable and fixed units. Requiring a suitable grounplane to operate efficiently, the BT-Stubby needs to be mounted onto a metal surface or enclosure.

As standard the BT-Stubby is offered with a SMA or RP-SMA connector. You can check our blog for the coaxial connector selection guide to help you determine the correct connector.

The BT-Stubby is available in straight or right-angle SMA or RP-SMA versions. It usually is panel mounted and mates to a pigtail or adapter cable terminated in a SMA-Female Bulkhead connector or a RP-SMA Bulkhead Jack connector.

W915-RS – Single band 915 MHz Whip antenna

Written by EAD Admin on 21st August 2017. Posted in 169 / 433 / 868 / 915 Antennas.

The W915-RS is a 915 MHz whip antenna based on a moulded ¼ wave whip antenna design operating in the 902-928 MHz frequency band. Designed for ISM-Band applications centred on 915 MHz, the W915-RS should ideally be mounted onto a groundplane. This makes it ideal for small ISM-band terminals and devices either fixed or mobile. The MW868 is an 868 MHz version for European ISM band frequencies.

It is approximately 80mm in length with a durable, moulded, flexible sheath and has a RP-SMA connector. This 915 MHz Whip antenna can also be supplied with other connectors such as SMA, TNC or BNC (minimum order quantities may apply). Please contact us for further details.

The 868 MHz version is called the MW868.