Tag: L2

HX-CHX602A GNSS foldable multi-constellation helix antenna

Written by EAD Admin on 16th October 2023. Posted in GNSS Antennas.

The HX-CHX602A GNSS foldable antenna from Harxon is a multi-constellation full frequency high gain geodetic surveying antenna. This small form factor antenna employs a foldable design that allows a maximum of 90 degree bending angle for superior GNSS signal availability while integrated with surveying terminals, pads and consoles in the field. Its high sensitivity, low power consumption, small dimensions, flexible angle of signal reception make it a great match for geodetic surveying applications.

This antenna offers full support for reliable and consistent satellite signals tracking, including GPS, GLONASS, Galileo and BeiDou, as well as L-Band. It also exhibits a very stable phase center by adopting multipoint feeding technology, exceptional low elevation satellite tracking with symmetric radiation patterns, high gain with ultralow signal loss, as well as outstanding wide-angle circular polarization (WACP) ensures remarkable positioning accuracy.

The HX-CHX602A GNSS foldable antenna adopts a rugged small form factor foldable design that allows a maximum of 90 degree bending angle, providing the most flexible GNSS signal reception angle for robust signal availability of the surveying control terminals.

For a very small compact multi-constellation antenna, check out the Harxon HX-CH7609A.

HX-CHX600A Multi-constellation lightweight helix antenna

Written by EAD Admin on 14th October 2023. Posted in GNSS Antennas.

The HX-CHX600A Multi-constellation lightweight helix antenna from Harxon is designed for high precision positioning and offers superior satellite signal tracking, including GPS, GLONASS, GALILEO and Beidou as well as L-Band correction service. Its RTK level positioning accuracy makes it ideal to be integrated into application as surveying and mapping, and various UAVs operations.

Harxon’s D-QHA technology ensures more stable performance of wide-angle circular polarization (WACP), and smaller antenna phase center deviation (PCV), which ensures a more precise positioning accuracy.

Strong anti-interference performance through a LNA that features an excellent out-of-band rejection performance, which can suppress the electromagnetic interference, providing stability and reliability of GNSS signals.

The compact dimensions of the HX-CHX600A Multi-constellation lightweight helix antenna of 40×82.6mm (dxh) do not compromise it superior signal tracking capabilities.

HX-CH6601A GNSS active helix antenna now in stock

Written by EAD Admin on 9th June 2020. Posted in News.

The HX-CH6601A GNSS active helix antenna from Harxon is now in stock in the UK for purchase. Receiving signals from GPS L1, L2, GLONASS L1, L2 and Galileo constellations, it is lightweight, high performing antenna solution.

With an integrated LNA offering effective gain of around 33 dB, the antenna weighs less than 25g and measures just 59mm in length and 27.5mm in diameter. The antenna is terminated in a SMA-Male connector.

The HX-CH6601A is ideal for UAV, GIS surveying and a number of precision positioning applications.

The HX-6601A GNSS active helix antenna can be purchased by European customers in small quantities via the Connex Webshop.

For more information, please contact us.

CH6601A D-Helix GNSS L1 L2 Active Antenna

Written by EAD Admin on 22nd May 2020. Posted in GNSS Antennas.

The HX-CH6601A D-Helix GNSS active antenna is able to track visible satellites under challenging conditions, providing
positioning solutions with high precision and reliable data. Its stable phase center guarantees the accuracy of positioning within millimetre level, that can be widely used in plant protection, tree lines, also for UAV power patrol, GIS surveying where high precision operations are
needed.

Supporting GPS L1 and L2, GLONASS L1 and L2, Galileo E1 as well as Beiduo, QZSS and SBAS, this antenna offers a practical and very functional solution for mobile applications requiring precision positioning.

Measuring just 59mm in length and 27.5mm in diameter, the HX-CH6601A antenna weighs just 25g and offers IP67 protection against the elements.

The HX-CH6601A D-Helix GNSS active antenna LNA features excellent out-of-band rejection performance, which can suppress the electromagnetic interference, providing the stability and reliability of GNSS signals. Also it effectively avoids disconnection dangerous when UAVs are operated under tower and electric power patrol.

For more Harxon products, please visit their website and contact us for pricing and availability. Small quantities available from the Connex Webshop.

L1 L2 L5 Antennas from EAD offer enhanced precision

Written by EAD Admin on 23rd October 2019. Posted in News.

Two L1 L2 L5 antennas introduced recently by EAD enable enhanced precision and accuracy in global GNSS tracking and timing applications.

The MP-RTK is a global GNSS magnetic mount puck antenna which is robust and low profile with an active antenna element. Ideal for mobile non-permanent tracking and positioning installations where permanent mount antennas are undesirable, the MP-RTK antenna is compact, durable and waterproof. It is fed by a 3M cable as standard which exits from the side of the unit and whilst terminated with a SMA-Male connector as standard, other connector terminations are possible. The MP-RTK antenna has an integrated LNA with approximately 37 dB effective gain for GPS L1, 36 dB effective gain for GPS L2 and 32 dB effective gain for GPS L5 thereby offering high gain performance.

The HIGAIN-RTK antenna is a high gain multi-constellation antenna for outdoor pole-mount deployment. This antennas mounts to poles with a 1-14 UNF thread. With effective gain of 41 dBi for GPS L1, GLONASS G1, GALILEO E2-L1-E1 and BEIDOU B1 and an effective gain of 39 dB for GPS L2, L5, GLONASS G2, GALILEO E5A, E5B, E6 and BEIDUO B2 and B3, the HIGAIN-RTK offers flexibility allowing the antenna to be installed some distance from the receiver using low loss cables.

For more information and quotations on our L1 L2 L5 antennas, please contact us.

Coach II multi-constellation MIMO LTE WiFi antenna

Written by EAD Admin on 23rd September 2019. Posted in 5G/4G/Cellular Antennas, GNSS Antennas.

The Coach II multi-constellation GPS L1, L2, L5 MIMO LTE and WiFi antenna has been released by PCTel. Known as the GL125-DLTEMIMO, this antenna is an unrivalled solution for transportation applications requiring multi-constellation GNSS, MIMO LTE and MIMO WiFi within a single antenna radome.

Permanently mounted via a stud underneath, the GL125-DLTEMIMO offers the following features:

Global multi-GNSS compatibility: 1150-290 MHz (GPS L2/L5; GALILEO E5A/E5B/E6; GLONASS L2/L3; BEIDOU B2/B3); 1500-615 MHz (GPS L1; GALILEO E1; GLONASS L1; BEIDOU B1/B1-2)
Dual port 4G LTE / sub-6 GHz 5G NR
802.11ac WiFi / Bluetooth connectivity
AAR compliant for railway applications
IP67 rated design

The Coach II multi-constellation antenna is available now, please contact us for more details.

GL125-DLTEMIMO multiband antenna GNSS multiconstellation

Written by EAD Admin on 23rd September 2019. Posted in GNSS Antennas.

The GL125-DLTEMIMO multiband antenna (also known as the Coach II antenna) from PCTEL meets the stringent requirements of complex RF communication systems in transportation applications.

This antenna features two diversity 4G LTE elements that facilitate the high speed data transmissions needed in dense RF environments. The platform also incorporates dual band 802.11ac Wi-Fi MIMO connectivity with two Wi-Fi elements.It also includes a proprietary high-rejection, multi-constellation GNSS L1 L2 L5 element for high precision location tracking.

The full multi-GNSS availability includes global GNSS Systems: 1150-1290
MHz (GPS L2/L5; GALILEO E5A/E5B/E6; GLONASS L2/L3; BEIDOU B2/B3);
1500-1615 MHz (GPS L1; GALILEO E1; GLONASS L1; BEIDOU B1/B1-2).

This GL125-DLTEMIMO multiband antenna is IP67 compliant once mounted and is permanent mount via stud underneath through which the cables and connectors pass.

For pricing and availability, please contact us.

For a GPS L1 L2 magnetic antenna, check out PCTEL’s GPS-L1/L2-28Mag.

New high gain multi constellation GNSS antenna

Written by EAD Admin on 29th October 2018. Posted in News.

The new HIGAIN-RTK antenna from EAD is a high gain multi constellation GNSS antenna is designed for outdoor pipe-mounted positioning applications receiving signals from GPS L1, L2, L5, GLONASS G1, G2, Galileo and Beidou systems. With a typical effective gain of around 39-40 dB with LNA, the HIGAIN-RTK offers excellent performance in a discreet IP67 waterproof enclosure.

With a 1-14 UNF thread in the base of the antenna, it can be mounted onto threaded pipes and mounting poles or alternatively can be clamped to a mast. Used in conjunction with RF240 or RF400 cables, this antenna can be located some distance away from the receiver for maximum installation flexibility.

For more information on the HIGAIN-RTK, please visit the product page here or contact EAD or your local distributor for availability and pricing.

HIGAIN-RTK high gain multi-constellation antenna

Written by EAD Admin on 29th October 2018. Posted in GPS & GNSS Antennas.

The HIGAIN-RTK is a high gain multi-constellation antenna for high accuracy positioning applications supporting GPS L1, L2 and L5, GLONASS, Galileo and BeiDou.

Designed for pipe-mount, continuous outdoor applications, the HIGAIN-RTK antenna is waterproof to IP67 and terminated in a N-Female connector. In the base of the antenna, there is a 1-14 UNF thread for mounting. The antenna can mount onto a threaded pipe or a deck, pole or rail mount that has the matching 1-14 thread.

With effective gain of 41 dBi for GPS L1, GLONASS G1, GALILEO E2-L1-E1 and BEIDOU B1 and an effective gain of 39 dB for GPS L2, L5, GLONASS G2, GALILEO E5A, E5B, E6 and BEIDUO B2 and B3, the HIGAIN-RTK offers flexibility allowing the antenna to be installed some distance from the receiver using low loss cables.

For pricing and availability on the HIGAIN-RTK antenna, please contact us or your local EAD distributor.

Check out our magnetic mount multi-constellation antenna, the MP-RTK.

First units of MP-RTK L1/L2/L5 antenna available

Written by EAD Admin on 1st October 2018. Posted in News.

The first units of EAD’S new MP-RTK L1/L2/L5 antenna available have now been dispatched to our initial customers.

The MP-RTK is a magnetic mount puck antenna supporting the reception of multi-constellation signals including GPS L1, L2, L5, GLONASS G1, GLONASS G2 and BeiDou. Well-suited for high precision applications such as precision agriculture, the MP-RTK antennas offers a high gain, but compact antenna solution for mounting onto a metal surface such as a vehicle roof.

Fed by a RG174 cable and SMA-Male connector as standard, the MP-RTK antenna has high pull-strength magnets built into the base of the antenna.

For more information, availability and pricing, please contact us.

MP-RTK – Multiband High Precision GNSS Antenna

Written by EAD Admin on 13th September 2018. Posted in GPS & GNSS Antennas.

The MP-RTK multiband high precision GNSS antenna is a rugged low profile magnetic mount antenna operating in a multi constellation environment including GPS L1, GPS L2, GPS L5, Galileo,GLONASS and BeiDou.

Fed by a single RG174 cable for all frequencies, the MP-RTK antenna has an integrated LNA with approximately 37 dB effective gain for GPS L1, 36 dB effective gain for GPS L2 and 32 dB effective gain for GPS L5 thereby offering high gain performance.

With a strong magnetic in the base of the antenna, it is ideal for vehicle or non-permanent mounting applications offering a rapid and simple deployment for high precision positioning applications. It is also possible to supply the MP-RTK antenna with a permanent mounting option based on our CPx base enclosure.

For European customers, small quantities can be purchased via the Connex webshop. For larger quantities and customers outside Europe, please contact your local EAD distributor or us here in the UK for more information.

Multi Constellation Magnetic Antenna for RTK applications

Written by EAD Admin on 5th September 2018. Posted in News.

EAD is introducing a multi constellation magnetic antenna for RTK GNSS applications. The MP-RTK antenna is based on the popular MP (Magnetic Puck) platform and supports GPS L1, L2, L5, GLONASS 1, GLONASS 2, Beidou 1 and Beidou 2 frequencies.

Fed by a single RG174 cable for all frequencies, the MP-RTK antenna has an integrated LNA with approximately 37 dB gain thereby offering high gain performance. With a strong magnetic in the base of the antenna, it is ideal for vehicle or non-permanent mounting applications.

Alternatively, if required the MP-RTK antenna element could be housed in the CPx permanent mount enclosure when a through-hole mount solution is required.

For pricing and availability of the MP-RTK antenna, please contact us.