Skip to main content

Tag: fibreglass

6.2 dBi 868 MHz Omni Outdoor Fibreglass antenna

The 6.2 dBi 868 MHz Omni outdoor omni-directional antenna from EAD is centre-tuned and optimised at 868 MHz. Ideal for Helium applications, this antenna is terminated in a N-Female connector allowing it to be connected to a Helium hotspot via custom RP-SMA Plug (Male) cable. For other LoRA, SigFox and LP-WAN applications, the OMNI-868-62 offers consistent and durable mechanical and electrical performance.

Measuring 77cm in overall length (excluding the bracket), the OMNI-868-62-NF is a quality antenna manufactured for permanent outdoor installation. With a fibreglass tube and a robust mounting bracket (including U-bolts for 35-42mm mast diameter) allowing both pole and wall mounting, this antenna is designed for long-term outdoor deployment without degradation.

Check out our DMO8684 for a 4.3 dBi optimsed 868 MHz Omni Antenna.

Specifications:

Centre Frequency:         868 MHz
VSWR:               <1.5:1
Polarization:       Linear – Vertical
Gain:                  6.2 dBi
Impedance:        50 Ohm
Radiation (H-plane):   360 degrees omni-directional
Radiation (e-plane Beamwidth @ -3dB:    22 degrees
Length:               77cm
Connector:        N-Female
Mounting:          Pole / Wall Mount (supplied with U-bolts) – Mast diameter 35-42mm

 

CFO Compact Fibreglass Omni Outdoor Antenna

The CFO Compact Fibreglass Omni Outdoor antenna is a very compact solution providing 4G/5G access. Based around 145mm long Fibregalss sheath, the CFO offers robust performance in a small form-factor.

Operating over a wideband from 617 to 7125 MHz, the CFO covers the majority of 4G/5G frequencies worldwide. It is supplied with a stainless steel L-bracket for wall-mounting and is terminated in a N-Female connector. VSWR across the bands is less than 3:1.

Ideal for 4G/5G access applications, including security, CCTV, telemetry systems, kiosks, vending and industrial cellular deployments, it’s compact size offers a discreet solution whilst the materials use facilitate long-term use without degradation.

Combine the CFO compact fibreglass omni antenna with N-Male terminated low loss coaxial cables to customise your installation.

For a high gain 4G antenna, check out our FGO antenna.

For customers in the UK, low quantities of our 4G/5G antennas can be purchased at www.connextech.co.uk.

Helium outdoor antennas things to check before you buy

The Helium network offering low power coverage across the world is rapidly growing in popularity. Across the world, as Helium miners are being deployed, people are looking at outdoor omni-directional antennas to optimise coverage from each miner installed.

This brief comment is going to focus on build quality.

There are quite a few outdoor antennas on the market, but selecting one with build quality good enough to be permanently installed outdoors without falling apart is critical.

Many low (and very low) cost antennas are available from online market places. Ignoring poor RF performance for now, many of these low cost antennas suffer from poor build quality or inferior materials and are unlikely to survive one average winter outdoors.

Our suggestion is to look for European-manufactured Helium outdoor antennas that tend to focus on quality materials and not solely on price. One particular area to focus on is the sheath or tube as poor materials weather and crack very rapidly leading to unit failure. A proven, durable option is an antenna with a fibreglass tube which will withstand many winter’s deployment without suffering weather or UV-degradation.

Also check the brackets/clamps that come with antenna. Are they fit for purpose? Is the antenna secure enough when mounted?

There is nothing worse than having to replace the antenna you took the trouble to install three months ago due poor survivability of the materials.

Just in case you’re interested, here is a link where you can purchase quality fibreglass tube 868 MHz antennas.