Tag: dual band

WIMO2458 4-Port WiFi Dual Band Omni-directional Antenna

Written by EAD Admin on 22nd November 2020. Posted in 2.4 & 5.8 GHz Antennas.

The WIMO2458 4-Port WiFi Dual Band Omni-directional Antenna is designed for continuous outdoor deployment. Housing four 2.4/5 GHz antenna elements, the WIMO2458 antenna is a compact solution for wall, pole or non-metal enclosure mounting.

Ideal for outdoor pole- and wall-mounted applications in environments where traditional ceiling mount antennas are undesirable, the WIMO2458 is a compact alternative for dual band WLAN installations, buildings and campuses hospitality, transportation and retail.

With almost 4 dBi gain in the 2.4 GHz band and more than 5 dBi gain in the 5 GHz band, the WIMO2458 4-Port WiFi antenna offers consistent RF performance across the bands. With a radome height of 187mm and a diameter at the base of 106mm, the antenna is relatively discreet for most installations and can be fed by low loss coaxial cables as required.

The WIMO2458 is part of our MIMO Omni range – check out the 5/GLTE version the LMO6138,

SCO-2451 dual band WLAN omni outdoor antenna

Written by EAD Admin on 23rd August 2019. Posted in WiFi Antennas.

The SCO-2451 dual band WLAN omni antenna from Sirio covers the 2.4 GHz and 5 GHz bands for pole-mounted outdoor wireless LAN/WIFI applications.

Housed in a Fibreglass tube, this antenna is assembled using quality materials and is built for continuous outdoor use. It offers 4 dBi gain on the lower band and 6 dBi gain on the upper band with a VSWR of less than 1.5:1 on the low band and less than 2:1 on the higher band. The SCO-2451 dual band WLAN omni antenna is terminated in a N-Female connector to be complemented with customised low loss RF240 and RF400 jumper cables.

The SCO-2451 antenna is just one antenna in a range of Sirio antennas for 4G and WLAN frequency bands. For more information, please contact us.

Hot Product – BTR2458 dual band wifi terminal antenna

Written by EAD Admin on 18th December 2017. Posted in News.

The BTR2458 dual band wifi terminal antenna is a 2.4 and 5 GHz compact dipole antenna designed for portable and fixed WiFi terminals and devices. Available with either a SMA-Male or RP-SMA connector and housed in a black, injection-moulded ABS sheath, the BTR2458 will connect to most WLAN terminals and devices offering robust performance in a discreet form factor.

The antenna is small enough for mobile or portable devices and has an articulating connector that can lock in either the horizontal or vertical positions for operational flexibility.

For more information on the BTR2458 antenna, you can download the specification sheet from the product page or contact EAD for any other questions.

CPD – Dual element WiFi low profile puck antenna

Written by EAD Admin on 30th October 2017. Posted in 2.4 & 5.8 GHz Antennas.

The CPD is a dual element WiFi low profile puck antenna with two 2.4 / 5 GHz dual band antenna elements. Designed for WiFi applications requiring two simultaneous connectors, the CPD is based on our modular puck antenna platform. Rated as IP67 once mounted onto an enclosure or vehicle roof, the CPD is discreet and robust and suited to long-term outdoor deployment.

The dual cables can be configured by the customer for length and there is a choice of connectors, typically RP-SMA, RP-TNC or standard SMA.

For a single band 2.4/5 GHz puck antenna, please check out the CPW. For a 1 x WiFi and 1 x LTE, please check out the CLW antenna.

BTR2458 – dual band WLAN terminal antenna

Written by EAD Admin on 21st August 2017. Posted in 2.4 & 5.8 GHz Antennas.

The BTR2458 is a dual band WLAN terminal antenna operating at 2.4 – 2.5 GHz and 4.9-6.0 GHz. It is a compact, groundplane independent terminal antenna with a SMA-Male connector and is suitable for access points, gateways and terminals that require a dual band antenna for WLAN applications. For single band terminal antennas for WiFi, the BKR2400 might be a suitable option.

The BTR2458 has a gain of 2 dBi and a VSWR of less than 2:1 across the bands. When fully extended, the overall length of the antenna is less than 100mm. The compact design means that the antenna is a discreet solution for mobile applications where larger dual-band antennas could cause an obstruction or be cumbersome.

The two common part numbers are FBTR35160-SM-KR with SMA-Male connector and FBTR35160-RS-KR with RP-SMA connector.

CPW – 2.4/5 GHz Low Profile WLAN puck antenna

Written by EAD Admin on 21st August 2017. Posted in 2.4 & 5.8 GHz Antennas.

The CPW is a WLAN puck antenna and is a tough and durable dual band 2.4 and 4.9-6.0 GHz puck antenna with approx 3 dBi gain on the lower band and 5 dBi on the upper band.

The antenna is a low profile screw-mount antenna requiring a 20mm drill hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed, secure and waterproof. The antenna is secured in place by a nut that is tightened from underneath. The CPW WLAN puck antenna is ideal for Wireless LAN and WiFi applications where a discrete antenna is required, but performance cannot be compromised.

The part number is FCPW35168-XX-XX where XX-XX refers to cable and length and connector type.

A cellular version (CPT) and GSM/3G (CPO) version of this antenna are also available.